General Terms and Conditions of Purchase
I. Scope
- These General Terms and Conditions of Purchase apply to all – including future – business relationships between a company belonging to the WECUBEX Group (‘the Buyer’) and entrepreneurs, legal entities governed by public law and special funds governed by public law (‘the Seller’).
- Any deviating or supplementary terms and conditions of the supplier shall only form part of the contract if and to the extent that the Buyer has expressly agreed to their validity.
II. Placing Orders and Performance of the Contract
- Quotations are provided free of charge to the buyer and are non-binding. The seller’s quotations are binding for at least 10 working days and may be accepted by the buyer at any time during this period.
- The buyer’s orders may be freely revoked until receipt of the order confirmation or – in the absence of an order confirmation – until delivery. The seller is required to confirm the order within three working days by means of a written order confirmation or by delivery. A delayed order confirmation specifying a different delivery date shall be deemed a new offer and requires the buyer’s confirmation.
- All obligations arising from the contract must be fulfilled by the seller itself. The use of a subcontractor is permitted only with the prior express consent of the buyer.
- The buyer’s registered office shall be the place of performance for all obligations arising from the contractual relationship.
III. Prices
- The agreed prices are fixed prices. All prices are exclusive of VAT but include packaging, insurance, transport and other ancillary costs.
- Where, in individual cases, the buyer bears the costs of transport or packaging, these shall be charged at the lowest possible rate, unless the buyer has specified a particular method of transport or packaging.
IV. Payment
- Unless otherwise agreed, payments shall be made, at the purchaser’s discretion, either within 14 days of receipt of the invoice and delivery, subject to a 3 per cent discount, or within 30 days of receipt of the invoice and delivery, strictly net. In the case of contracts for work and services, the date of acceptance shall apply in place of the date of delivery. Where documentation, test certificates (e.g. factory certificates) or similar documents form part of the scope of supply, the payment period shall not commence until such documents have been handed over to the purchaser in accordance with the contract. In the event of acceptance of early deliveries or services, the due date shall be determined by the agreed delivery or service date.
- Payments shall be made by cheque or bank transfer. Payment shall be deemed to have been made on time if the cheque is posted on the due date or if the bank transfer is instructed on the due date.
- The interest rate on late payments is 5 per cent. The seller reserves the right to claim any demonstrably higher loss resulting from late payment. The buyer reserves the right to prove that the seller has incurred only a lesser loss.
- The seller is only authorised to exercise a right of retention to the extent that their counter-claim is based on an undisputed or legally established claim. They may only set off against undisputed or legally established counter-claims.
V. Delivery times / Delays in delivery
- Unless expressly agreed otherwise, the delivery times and deadlines specified by the buyer are binding. The seller must inform the buyer without delay if circumstances come to their attention which give cause to fear a delay in delivery.
- Compliance with delivery dates or delivery periods shall be determined by the receipt of the goods at the delivery point specified by the buyer; in the case of deliveries involving installation, assembly or other services, acceptance shall be decisive.
- The seller may only invoke the failure to provide necessary documents or other information to be supplied by the buyer if the seller has not received the documents despite a written reminder.
VI. Retention of Title
- Where the seller has expressly reserved title to the goods supplied, title to the goods shall pass to the buyer upon payment for them. Any extended retention of title (retention of title in respect of current account transactions) declared by the seller shall be invalid.
VII. Execution of Deliveries and Passing of Risk
- All deliveries by the seller are made on a DDP basis to the agreed place of delivery (Incoterms 2010).
- The seller bears the risk of accidental loss and accidental deterioration of the goods sold, even in the case of ‘carriage paid’ and ‘free delivery’ shipments, until the goods are handed over at the destination.
- Partial deliveries require the buyer’s consent. If only a partial delivery is made without the buyer’s express consent, the buyer is entitled to withdraw from the entire contract if they have no interest in the partial delivery.
- Excess or short deliveries are permitted only within the limits customary in the trade. We reserve the right to accept or reject such deliveries. If the buyer does not accept a short delivery, the buyer is entitled to withdraw from the entire contract if they have no interest in the short delivery.
VIII. Declarations regarding originating status
- The seller is obliged, at the buyer’s request, to draw up a supplier’s declaration regarding the goods to be supplied and to provide it to the buyer. The seller shall also enable the customs authorities to verify the proofs of origin and shall provide the necessary information and any required confirmations.
- The seller is obliged to compensate for any loss arising from the fact that the declared origin is not recognised by the competent authority as a result of an incorrect certificate or the lack of any means of verification.
IX. Liability for material defects
- The seller must supply the goods to the buyer free from material defects and defects of title. In particular, the seller shall be responsible for ensuring that its deliveries and services comply with recognised technical standards and the contractually agreed characteristics, as well as with the standards applicable in Germany or (if notified to the seller) in the country of destination of the end product (safety, occupational health and safety, and accident prevention regulations, etc.). Strict compliance with the agreed specifications, the applicable standards and legislation, and the recognised rules of good engineering is one of the seller’s essential obligations under this contract.
- Our obligation to inspect goods upon receipt is limited to defects that are apparent upon external examination, including a check of the delivery documents (e.g. damage in transit, incorrect or short deliveries). If the seller is based in Germany, notices of defects are in any event deemed to have been given in good time if they are received by the seller within 5 working days of receipt of the goods or, if such a defect becomes apparent at a later date, within 5 working days of the buyer becoming aware of the defect. If the seller is based outside Germany, any defects are deemed to have been reported in good time if the buyer notifies the seller of them within 4 weeks of the date on which the buyer discovered them or should have discovered them.
- In the event of defects, the seller shall provide subsequent performance by remedying the defect or delivering goods free from defects, at the buyer’s discretion. If the method of subsequent performance chosen by the buyer is impossible, the seller shall be entitled to provide subsequent performance in another manner, provided this is reasonable for the buyer. If subsequent performance is impossible as a whole, if the seller refuses to provide subsequent performance, if no attempt at subsequent performance is made despite a reasonable period having been set, or if subsequent performance has failed, the buyer shall be entitled to withdraw from the contract at any time within the limitation period set out in Clause IX.6, without prejudice to any other rights they may have. The period referred to in Article 49(2) of the CISG (where applicable) shall not end before the expiry of the limitation period set out in Clause IX.6.
- The buyer manufactures goods which, in turn, are incorporated into products made by the buyer’s customers. If defective goods supplied by the seller are used in the manufacture of the buyer’s goods and this results in those goods being defective, the buyer may be held liable to its end customers for consequential damages, such as loss of production, the production of rejects, product recalls, and damage to property or personal injury. The seller is obliged to cover their liability risk by taking out insurance and, upon request, to provide the buyer with proof of such cover.
- The seller hereby assigns to the buyer – by way of performance – all claims to which it is entitled against its suppliers arising from and in connection with the delivery of defective goods or goods that do not meet the agreed specifications. It shall provide the buyer with all documents necessary for the buyer to assert such claims. The buyer accepts the assignment.
- Notwithstanding Section 438(1)(3) of the German Civil Code (BGB) and Section 634a(1)(1) of the German Civil Code (BGB), the general limitation period for claims arising from material defects and defects of title shall be three (3) years from delivery or, where acceptance has been agreed, from acceptance. Longer statutory limitation periods remain unaffected. The limitation period pursuant to Article 39(2) of the CISG (where applicable) shall not expire before the expiry of the limitation period set out in this Section IX.6.
X. Confidentiality
- The Buyer reserves ownership and all copyright in drawings, illustrations, calculations, descriptions and other documents which it makes available to the Seller. The seller may only use these documents for the purposes of co-operation with the buyer and must not reproduce them, make them available to third parties or use them for any other purpose without the buyer’s express consent. This shall continue to apply even after the termination of the contract. The seller must return these documents at the buyer’s request if they are no longer required by the seller in the ordinary course of business. Any copies made by the seller must be destroyed in this case; the only exception to this is where they are retained in accordance with statutory retention obligations.
- Paragraph 1 shall apply mutatis mutandis to tools, templates, samples and other items which the buyer provides to the seller for the purposes of manufacture.
- If the seller culpably breaches the obligations set out in X.1 or X.2, they shall pay the buyer a contractual penalty of EUR 10,000. The buyer is entitled to claim the contractual penalty in addition to specific performance and as the minimum amount of damages owed by the seller in accordance with statutory provisions; this does not affect the right to claim further damages.
XI. Jurisdiction and Applicable Law
- The place of jurisdiction shall be the buyer’s registered office. The buyer is also entitled to bring proceedings against the seller at the seller’s registered office.
- In addition, German law shall apply and – where applicable – the United Nations Convention on Contracts for the International Sale of Goods (CISG).